Hager 009152 4501 CVR 36" X 84" US26D MLRXLM REV 3 Satin Chrome

MISC. – EXITS

US26D – SATIN CHROMIUM

Stile Width

• 4″ (102mm) minimum stile width required
• All stile widths are measured from door edge

Cover Tube

Aluminum

Notes

• Center line prep is 40″. If door prep elevation is lower, a longer rod will need to be ordered
• Recommended to be used on appropriately reinforced doors

DOOR HEIGHT in. – EXIT DEVICE

84

Cover

Stainless steel, zinc

Latchbolt Type

• Top – 1/2″ (13mm) throw, Pullman type with automatic dead-latching, stainless steel
• Bottom – 1/2″ (13 mm) throw, Pullman type, held retracted during door swing, stainless steel

Fasteners

• Wood and machine screws
• Thru-bolts

ELECTRICS – EXITS

MOTOR DRIVEN ELECTRIC LATCH RETRACTION w/ REQUEST TO EXIT – LATCHBOLT MONITORING

ACCESSORIES – EXITS

NOT APPLICABLE

Door Thickness

1-3/4″ (44mm) – Standard

Push Bar

OPTIONAL Photoluminescent push bar cover available

End Caps

• Standard end cap (zinc)
• OPTIONAL Flush end cap (zinc)

FINISHES – EXITS

US26D – SATIN CHROMIUM

RATINGS – EXITS

STANDARD – NON-FIRE RATED

Trim

• Archer, August, Charles, Johnston, Joshua, Louis, Warren, William or Withnell lever with escutcheon trim
• Pull plate trim (excluding 45PT)
• Rim cylinder x optional pull

Projection

• 3″ (76mm) in undogged position
• 2-5/8″ (67mm) in dogged position

Maximum Door Height

• 7′ (2134 mm) – Standard
• 8′ (2438 mm) – Optional
• 10′ (3048 mm) – Optional

DOOR WIDTH in. – EXIT DEVICE

36

Strikes

• Stainless steel with plated rollers included standard with panic devices
• Solid stainless steel included standard with fire-rated devices
• Top strike mortised into frame

Product Overview
Functions:
01 – Exit Only (device)
Applications:

• Heavy duty commercial
• NOT recommended for single-rabbet double egress frames
• NOT recommended for doors with inset greater than 1/8″

Notes:

• Center line prep is 40″. If door prep elevation is lower, a longer rod will need to be ordered
• Recommended to be used on appropriately reinforced doors

Certifications:

• ANSI/BHMA A156.3-2014 Grade 1
• UL305 Listed for Panic Hardware
• UL/cUL Listed for up to 3 hours for “A” labeled doors up to 10′ in height
• UL10C Positive Pressure Rated
• UL10B Neutral Pressure Rated
• Complies with ANSI A117.1 for accessible buildings and facilities

Finishes:

• US3, US4, US10B, US26, US26D, US32D, BLK
• Trim not available in US32D

Warranty:
Lifetime
Dogging:

• Hex key dogging standard on panic rated devices
• Cylinder dogging available on panic rated devices – specify “CD”. 3902 Mortise cylinder with standard cam sold separately. Cylinder Length of 1-1/8″ (29mm) – 1-3/8″ (35mm) is required

Door Width:

• 36″ (914mm) field sizeable to 30″ (762mm) panic-rated door and 28″ (711mm) fire-rated door
• 48″ (1219mm) field sizeable to 36″ (914mm) panic- or fire-rated door
• Reference electrified exit device for door width specifications

Rod Length:

• Rods for 7′ (2134mm) door – Standard
• Rods for 8′ (2438mm) and 10′ (3048 mm) doors – Optional
• Door height of 7′ (2134mm) requires 34-5/8″ (879mm) top rod length
• Door height of 8′ (2438mm) requires 46-5/8″ (1184mm) top rod length
• Extension rodkits available 2′ (610mm) or 3′ (914mm)