Adams Rite 4568-011-130 Aluminum Door Trim Satin Aluminum Ritecoat Paint

• Levers: Lever of cast aluminum, in choice of 130 Satin Aluminum, 121 Dark Bronze, or 119 Black. Modern European styling offers a generous hand grip with shank offset from the narrow stile jamb for hand safety. 4569 has return end to meet anti-snag code requirements.
• Cam Plugs: Secured in latch body by cylinder setscrew, plug is also rigidly tied to handle escutcheon by hardened steel pins. Handing can be reversed by removing a spring clip, reversing the cam, and replacing the clip.
• Options: Can be ordered for left or right hand door, but is easily reconfigured in the field to accommodate either door swing. The three standard handles shown are for 1-3/4 thick doors. Available on special order for doors up to 3-1/4.
• Standard Package: Packed individually with cam plug handed LH or RH as specified. Mounting screws included. Shipping weight: 1/2 lb.

Thickness

1-3/4″ – 2″

Package Volume

61.875

Color

Satin Aluminum Ritecoat Paint

For Use With

MS+1890

Product Width

1.3438″

Hand

Field Reversible

Product Height

2.34″

Package Qty

1

Package Height

2.75″

Screws

Machine

Package Width

4.5″

Color Code

130

Origin

USA

BAA Qualified

Yes

Product Length

3.95″

Rose/Escutcheon Design

Rectangle

Base Material

VARIES

Lever/Knob Design

Flat Euro Lever, No Return

Package Length

5″

Product Overview

Flat Euro Lever Trim without Return, For 1-3/4 In. to 1-15/16 In. Thick Door, Field Reversible, Satin Aluminum Paint

Euro

These handles fit solidly into the cylinder hole of the latch.

Designed to operate 4300, 4500 and 4900 Series Deadlatches by a natural downward hand movement, these handles incorporate an activator cam disc that mounts on the handles escutcheon and fits solidly into the cylinder hole of the latch. Not intended for use as a door pull.

Escutcheons: Both handles shown use the same 1-3/8″ x 4″ escutcheon, designed to match the clean lines of a narrow stile door. Steel mounted base is secured by hidden screws and has two large helical compression springs. (One becomes a spare” once handing is given.) A 1/4″ square heat-treated spindle is part of escutcheon assembly, which interlocks with the cam plug. Finished to match lever.