Hager 023986 4501 SVR LD 36" X 84" US4 REV 2 Satin Brass

Projection

• 3″ (76mm) in undogged position
• 2-5/8″ (67mm) in dogged position

Warranty

One year on electrified, componentsLifetime on hardware components

Maximum Door Height

• 7′ (2134mm) – Standard
• 8′ (2438mm) Optional
• 10′ (3048mm) Optional (panic device only)

Cover

Stainless steel, zinc

Trim

• Archer, August, Charles, Johnston, Joshua, Louis, Warren, William or Withnell lever with escutcheon trim
• Pull plate trim (excluding 45PT)
• Rim cylinder x optional pull

Door Thickness

1-3/4″ (44mm) – Standard up to 3″, except with night latch which is 2-1/2″

Fasteners

• Wood and machine screws
• Thru-bolts

Latchbolt Type

• Top – 1/2″ (13mm) throw, Pullman type with automatic dead-latching, stainless steel
• Bottom – 1/2″ (13mm) throw, Pullman type, held retracted during door swing, stainless steel

DOOR WIDTH in. – EXIT DEVICE

36

Cover Tube

Aluminum

ELECTRICS – EXITS

NOT APPLICABLE

Push Bar

OPTIONAL Photoluminescent push bar cover available

ACCESSORIES – EXITS

NOT APPLICABLE

FINISHES – EXITS

NOT APPLICABLE

MISC. – EXITS

NOT APPLICABLE

DOOR HEIGHT in. – EXIT DEVICE

84

End Caps

• Standard end cap (zinc)
• OPTIONAL Flush end cap (zinc)

RATINGS – EXITS

LESS DOGGING – NON-FIRE RATED

Product Overview
Functions:
01 – Exit Only (device)
Applications:
Heavy Duty Commercial
Notes:

• Center line prep is 40″. If door prep elevation is lower, a longer rod will need to be ordered.
• Recommended to be used on appropriately reinforced doors
• The 4500 SVR tested configuration for Miami-Dade County, Florida NOA #17-1226.23, used a panic threshold with no bottom strike. The suggested Hager part is the 520S but any approved panic threshold can be used. Please see the NOA for further details.

Certifications:

• ANSI/BHMA A156.3-2014 Grade 1
• UL305 Listed for Panic Hardware
• UL/cUL Listed for up to 3 hours for “A” label doors up to 10′ in height
• UL10C Positive Pressure Rated
• UL10B Neutral Pressure Rated
• Complies with ANSI 117.1 for accessible buildings and facilities
• Miami-Dade County, Florida NOA #122-0816.08, Exp. Aug. 16, 2027

Finishes:

• US3, US4, US10B, US26, US26D, US32D, BLK
• Trim is not available in US32D

Warranty:
Lifetime
Door Width:

• 36″ (914mm) field sizeable to 30″ (762mm) panic-rated door and 28″ (711 mm) fire-rated door
• 48″ (1219mm) field sizeable to 36″ (914mm) panic- or fire-rated door
• Reference electrified exit device for door width specifications

Stile Width:

• 5-3/8″ (137mm) minimum stile width required for single door and 5/8″ (16 mm) stop
• 4-7/8″ (124mm) minimum stile width required for double doors
• 4-7/8″ (124mm) minimum stile width required for double door x Rim device with double door strike
• All stile widths are measured from door edge

Rod Length:

• Rods for 7′ (2134mm) door – Standard
• Rods for 8′ (2438mm) door Optional
• Door height of 7′ (2134mm) requires 33-1/4″ (845mm) top rod length
• Door height of 8′ (2438mm) requires 45-1/4″ (1149mm) top rod length
• Extension rods kits available, 2′(610mm) or 3′ (914mm)

Notes:

• Center line prep is 40″. If door prep elevation is lower, a longer rod will need to be ordered.
• Recommended to be used on appropriately reinforced doors
• The 4500 SVR tested configuration for Miami-Dade County, Florida NOA #17-1226.23, used a panic threshold with no bottom strike. The suggested Hager part is the 520S but any approved panic threshold can be used. Please see the NOA for further details.

Strikes:

• Stainless steel with plated rollers – Included standard with panic devices
• Solid stainless steel – Included standard with fire rated devices
• Surface applied to frame with slotted holes for easy adjustment
• 10′ (3048mm) fire rated device requires strike and hook kit, 4912, for top strike
• Double door strike for use with surface vertical rod and rim device available

Dogging:

• Hex key dogging standard on panic-rated devices
• Cylinder dogging available on panic rated devices – specify “CD”. 3902 Mortise cylinder with standard cam sold separately. Cylinder Length of 1-1/8″ (29mm) – 1-3/8″ (35mm) is required.